Frigidaire Washer Front Load User Manual

0

Out of 0 Ratings

Owner's of the Frigidaire Washer Front Load gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 26
 
11
OPERATING INSTRUCTIONS
Cycle Settings
Appropriate wash temperature, spin speeds, soil level
and options will automatically be displayed for each
cycle. The settings can be changed before the cycle is
started. Make modifi cations according to fi ber content,
colorfastness and soil level. Modifi cations for each cycle
will be remembered and recalled each time that cycle is
selected in the future.
hot
Use this setting for heavily soiled white or colorfast
cottons and blends.
warm
Use this setting for normally soiled white or colorfast
cottons or blends.
cold
Some warm water will automatically blend with cold tap
supply to achieve a precise cold. Use this setting for
lightly soiled non-colorfast items, knits, delicates, and
hand washables.
cold water clean
Wash and rinse temperatures are equivalent to
temperature of cold tap supply. Use this selection for
fabrics and colors that are prone to dye transfer. For
use with cold water
detergents.
NSF Protocol P172
Sanitization Performance of Residential
and Commercial, Family-Sized Clothes
Washers
SPIN SPEED
SOIL LEVEL
Max, high, medium and low spin speeds are available
for each cycle. The spin speed and/or duration of fi nal
spin vary from model to model and cycle to cycle.
Increasing the spin speed will extract more water,
decrease drying time and conserve energy. Decreasing
the spin speed will reduce wrinkling.
Select low spin speed to gently spin items that should
be line dried.
Use no spin to omit the fi nal spin at the end of the cycle.
The load will be very wet. Remove items from the wash
drum to drip dry or select a spin only cycle to remove
excess water at a more convenient time.
Adjust the wash time based on the soil level of each load.
Max, heavy, normal, light and extra light soil levels
are available.
Follow the fabric care label instructions
on items to be washed.
For best results
WASH WATER TEMPERATURE
To change the preset temperature, press the temp
button to scroll to the desired setting. A cold water rinse
saves energy and reduces wrinkling.
To protect your fabrics, not all temperatures are available
with every cycle. The indicator will not light if the setting
is not available with that cycle.
Wash water temperatures are automatically regulated to
maximize detergent effectiveness and improve washing
performance. The water heater setting and its distance
from the washer, water usage in other parts of the home,
and seasonally low ground water temperature in some
geographic areas can affect water temperature.
sanitize
This setting sanitizes heavily soiled colorfast fabrics
such as towels, bedding, and children’s clothing by
killing 99.9% of bacteria using wash water heated with
a boost heater to 152° F (67° C). Cold water is used to
cool and rinse the load.
To return to factory
settings, press these
two buttons at the
same time and
hold until the signal
sounds.
NOTE
To change settings after the cycle starts, press pause,
adjust the setting and press START to resume the cycle.
NOTE
Only sanitizing cycles have been designed to meet the
requirements of NSF P172 protocol for sanitization
effi cacy.

   Find Your Products By Category